Steel pole mounting brackets are fabricated from 1/4 inch thick steel tube 3 x 3 inches square and 1/8 x 2 inch steel support arms with slotted mounting holes for the bat house.
This unit was designed so it can be used with 1-1/2 inch (1-13/16” OD), or 2 inch (2-3/8” OD) black pipe and can be used to mount any of our Premier Series Bat Houses.
This unit will support any of the 5 different model bat houses we sell.
We recommend using a 2 inch pipe when mounting a 3, 4 or 5 chamber unit (pole not included).
Baked on Powder Coat Finish
Brackets are designed with two holes tapped into the sides of each of the 3 x 3 inch receiver tube to accept bolts and jam nuts for fastening to the pole. Bolts eliminate the possibility of slippage on the pole and make it easy for you to adjust the direction of the bat house so it faces South/Southeast.
All hardware and installation instructions included.
Note: Mounting Brackets purchased along with a Premier Series Bat House qualify for FREE SHIPPING. To qualify, be sure to select desired bracket from the drop down menu accompanying each bat house selected.
We Pay All Shipping Charges for mounting brackets when ordered with a bat house or the Easy-up-Bracket for orders shipped in the lower 48 states.
