Steel Pole Double Unit, Back-to-Back Mounting Bracket for Bat Houses

All brackets for a pole mounting application are fabricated with a 3 x 3 inch square 13/16 inch thick wall receiver tube welded to the 2 inch steel support arm. The tubing has two 1/4 inch bolt holes taped into the sides to receive a 1/4 inch bolt with a jam nut on the bolt to assure proper sacrament to the mounting pole.

This unit was designed so it can be used with 1-1/2 inch (1-13/16” OD), or 2 inch (2-3/8” OD) black pipe with an additional arm for mounting two bat houses. It can be used to mount any of our Bat Houses.

This unit is constructed in the same manner as the single house mounting bracket with the exception to an additional arm for mounting two bat houses back to back.