Bat House Mounting Brackets

All of our Bat House Mounting Brackets are designed to fit a particular need. We have designed four different bracket models from high quality steel with all welded construction.

All of our brackets are designed and fabricated in house so we can assure you that you are getting a high quality product.

All of our bat house mounting brackets are completely adjustable so they can move freely up and down on the steel pole or a wood post or pole so you can achieve the desired height you want,or you can use the wall mounting bracket for a structure mounting.

We have applied a powder coat finish on all of our bat house mounting brackets for a long lasting durable finish. Powder coating. What is it?

We have four different models of mounting brackets to choose from. Easy to attach.

Bat houses should be installed no less then 12 Feet above ground level. That is 12 feet from the bottom of the bat house landing pad area. The higher the better.

Make sure your bat house faces in a south or southeast direction for maximum sun exposure.

All hardware included.

FREE SHIPPING WHEN ORDERED WITH A BAT HOUSE

Steel Pole Single Unit Mounting Bracket

Single Unit BracketAll brackets for a pole mounting application are fabricated with a 3 x 3 inch square 1/4 inch thick wall receiver tube welded to the 2 inch steel support arm.The tubing has two 1/4 inch bolt holes taped into the sides to receive a 1/4 inch bolt with a jam nut on the bolt to assure proper sacrament to the mounting pole.

This unit was designed so it can be used with 1-1/2 inch (1-13/16” OD), or 2 inch (2-3/8” OD) black pipe and can be used to mount any of our Premier Series Bat Houses

This unit will support any one of our 5 different model bat houses that we sell.

We recommend using a 2 inch pipe when mounting a 3, 4 or 5 chamber unit.

Buy Now


Steel Pole Mounting Bracket for a Back-to-Back installation of Bat Houses

Back to Back unitThis unit is constructed in the same manner as the single house mounting bracket with the exception to an additional arm for mounting two bat houses back to back.

We recommend only using a 2 inch pole for this application and no more than two, 2 chamber units.

Buy Now


Wood Post or Pole Mounting Bracket for a single unit

Square Post Bracket
Square Post Application

Round Post Application
Round Pole Application 		This unit is constructed with 1/8 inch x 2 inch mounting plate and 1/8 inch x 1 inch mounting arms.

This unit will support any one of our 5 different model bat houses that we sell.

You can use this mounting unit to attach your Bat House to a square or rectangular wood post or a wood pole up to 12-1/2 inches wide. We do not recommend attachment to trees, dead or alive.
Buy Now

Wall Mounting Bracket

Wall Mounted Bat House Bracket
Wall Mounted Bat House Bracket

The wall mounting unit was designed and constructed for the application of direct attachment of a bat house to a wall surface, be it on a residence or commercial structure.

It is contrasted from 1/8 inch x 2 inch steel and welded solid at all points. This unit will hold the bat house away from the wall 5 inches and helps to decrease or eliminate the bat guano droppings from hitting the wall area.

This unit will support any one of our 5 different model bat houses that we sell.

All hardware for mounting the bat house to the brackets is included.

(Hardware to mount the bracket to the structure surface is not included because there are so many different attachment possibilities, depending on the structure construction.)

Buy Now

Complete details and ordering options can be found within our Secure Ordering System.

Click here to create or view your shopping cart.